Contact Info
  • Octagreen Nano Products India Pvt.Ltd 48/2138,A,A1,A2,Shakthi Enclave, Perandoor Road,Elamakkara P.O, Kochi 682026, Kerala.
  • 0484 2539439, +91 8606511141, 1800 313 6949
  • Mon - Sat 09:30 - 17:30

ULTRA GUARD Waterproof Exterior Emulsion


Ultra Guard Waterproof Emulsion is a 100% acrylic, anti fungal, anti algae, glossy emulsion with very high waterproofing properties. This is a highly durable, water repellent, UV resistant, fungus/ algae/ bacteria resistant, thermally insulating,elastomeric, anti-sticking, and hence can be used as finish for a wide variety of exterior and interior surfaces. It provides a glossy, decorative finish to the surface.


Outstanding adhesion – by virtue of which it gets embedded in the surface (not afilm like), high resistance to weathering (UV, Fungus, water etc.) and blistering, low VOC, highcoverage area with desirable ease of application characterize the product. Additional featuresinclude its elastomeric (stretchable paint that cover cracks) and anti-sticking abilities. Itproduces an all season and breathable type finish. It provides robust performance due toinorganic, structurally defect-free particles, incorporated in the paint matrix.


  • FINISH/USAGE : Exterior
  • TYPE : WWater base Exterior Primer
  • COLORS AVAILABLE : 4 bases (white, light, medium, dark) are available. The base material may be tinted with universal colorants to a full range of custom colours.
  • PRACTICAL COVERAGE : 70-80 square feet per liter for 2 coats depends on the porosity of thesubstrate.
  • LIMITATIONS : Not recommended for floors or decks.
  • SURFACES : Apart from exterior plaster, drywall, concrete and masonry this emulsion can also be effectively applied on exterior hardboard siding, gypsum board, concrete, and masonrysurfaces.
  • NEW WORK:Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crack fillers for best results. On new drywall, use of one coat of primer on wall putty & 2 coats finish is recommended.
  • PACKING : 20 Lit, 10 Lit, 4 Lit, 1 Lit


  • REFINISH WORK:Conditions listed above should be strictly followed. Previously painted,glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed.
  • SURFACE TEMPERATURE:For best results, ambient temperature is preferred. Frost, fog, ordamp conditions should be avoided.
  • APPLICATION : Paints should be stirred well before use. Use of roller or brush for applicationof paint is recommended. Application of only one coat primer & two coats finish is advisable.
  • Thinning is required for brush/rollerapplication. Use only clean water and approximately 400-500 ml of water per lit.
  • DRYING TIME:Surface dries naturally dust free in 4 hours. Recoat should be applied onlyafter 4 hours. Drying time may vary depending on temperature and humidity.
  • CLEAN UP: Application equipment should be cleaned with soap and water.

Technical Data Sheet

Type Elastomeric Waterproof Emulsion
Thinning Ratio No thinning
Viscosity by stormer 77KV at 25oC
Sp. Gravity 1.10 at 25oC
Method of application Brush/Roller
Application temperature Room temperature
Application Viscosity 20”
Coverage Area 70-80sq ft/liter
Drying Time Surface Dry 4 hrs
Minimum recoat time 4 hrs
Brushability Ok
Flow Leveling Ok
Opacity Ok
UV Stability 300 hrs+
Gloss Glossy / Sheen
Alkali Resistance a)NH4OH vapour b)10% NaOH solution Passed IS+ Passed IS+
Office Telephone: 0484 2539439
Mobile: +91 8606511141
Octagreen Nano Products India Pvt.Ltd 48/2138,A,A1,A2,Shakthi Enclave, Perandoor Road,Elamakkara P.O, Kochi 682026.