Contact Info
  • Octagreen Nano Products India Pvt.Ltd 48/2138,A,A1,A2,Shakthi Enclave, Perandoor Road,Elamakkara P.O, Kochi 682026, Kerala.
  • 0484 2539439, +91 8606511141, 1800 313 6949
  • Mon - Sat 09:30 - 17:30

ALLWEATHER Weather Proof Exterior Emulsion


All WeatherExterior Emulsion is a high acrylic, antifungal, antialgae, soft sheen emulsion with very high weather resistant properties.


Very high resistance to weathering (UV, Fungus, Water etc.) and blistering, low VOC, high coverage area with desirable ease of application characterize this paint. Additional features include high water repellence, quick drying etc.


  • FINISH/USAGE : Exterior
  • TYPE : WWater base Exterior Primer
  • COLORS AVAILABLE : 4 bases (white, light, medium, dark )are available. The base material may be tinted with universal colorants to a full range of custom colours.
  • PRACTICAL COVERAGE : 70-80 square feet per liter for 2 coats depends on the porosity of the substrate.
  • LIMITATIONS : Not recommended for floors or decks.
  • SURFACES : Interior plaster, drywall, concrete and masonry surfaces. This paint can also beapplied on hardboard siding, gypsum board.
  • NEW WORK:Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crack fillers for best results. On new drywall, use of one coat of primer on wall putty & 2 coats finish is recommended.
  • PACKING : 20 Lit, 10 Lit, 4 Lit, 1 Lit


  • REFINISH WORK:Conditions listed above should be strictly followed. Previously painted,glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed.
  • SURFACE TEMPERATURE:For best results, ambient temperature is preferred. Frost, fog, ordamp conditions should be avoided.
  • APPLICATION : Paints should be stirred well before use. Use of roller or brush for applicationof paint is recommended. Application of only one coat primer & two coats finish is advisable.
  • Thinning is required for brush/rollerapplication. Use only clean water and approximately 400-500 ml of water per lit.
  • DRYING TIME:Surface dries naturally dust free in 4 hours. Recoat should be applied onlyafter 4 hours. Drying time may vary depending on temperature and humidity.
  • CLEAN UP: Application equipment should be cleaned with soap and water.

Technical Data Sheet

Type Superior Exterior Emulsion
Thinning Ratio 1:0.4
Viscosity 73KV at 25oC
Sp. Gravity 1.25 at 25oC
Method of application Brush/Roller
Application temperature Room temperature
Application Viscosity 20”
Coverage Area 70-80sqft/liter/2 coats
Drying Time Surface Dry 4 hrs
Minimum recoat time 4 hrs
Brushability Ok
Flow Leveling Ok
Opacity Ok
UV Stability 300 hrs+
Gloss Glossy
Alkali Resistance a)NH4OH vapour b)10% NaOH solution Passed IS+ Passed IS+
Office Telephone: 0484 2539439
Mobile: +91 8606511141
Octagreen Nano Products India Pvt.Ltd 48/2138,A,A1,A2,Shakthi Enclave, Perandoor Road,Elamakkara P.O, Kochi 682026.