Eco Friendly Paint Brands & Manufacturing Companies In Kerala

Products

FIRST COAT Exterior Primer

DESCRIPTION:

Water based acrylic exterior primer of finest quality is a durable, water repellent, fungus/ algae/ bacteria resistant, and hence can be used as an undercoat for a wide variety of exterior surfaces.

BENEFITS:

Outstanding adhesion due to very high surface area of fine acrylic materials – by virtue of which it gets embedded in the surface (not a film like), high resistance to weathering (UV, Fungus, water etc.) and blistering, low VOC, high coverage area with desirable ease of application characterize this product.

Usage

FINISH/USAGE : Exterior
TYPE : WWater base Exterior Primer
COLORS AVAILABLE : White
PRACTICAL COVERAGE : 110-140 square feet per liter per coat depends on the porosity of the substrate.
LIMITATIONS : Not recommended for floors or decks.
SURFACES : Interior plaster, drywall, concrete and masonry surfaces.
NEW WORK:Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crack fillers for best results. On new drywall, use of one coat of primer on wall putty & 2 coats finish is recommended.
PACKING : 20 Lit, 10 Lit, 4 Lit, 1 Lit

SURFACE PREPARATION:

REFINISH WORK:Conditions listed above should be strictly followed. Previously painted,glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed.
SURFACE TEMPERATURE:For best results, ambient temperature is preferred. Frost, fog, ordamp conditions should be avoided.
APPLICATION : Paints should be stirred well before use. Use of roller or brush for applicationof paint is recommended. Application of only one coat primer & two coats finish is advisable.
Thinning is required for brush/rollerapplication. Use only clean water and approximately 400-500 ml of water per lit.
DRYING TIME:Surface dries naturally dust free in 4 hours. Recoat should be applied onlyafter 4 hours. Drying time may vary depending on temperature and humidity.
CLEAN UP: Application equipment should be cleaned with soap and water.

Technical Data Sheet

Type	Exterior Primer
Thinning Ratio	1:0.5
Viscosity	82 KV at 250C
Sp. Gravity	1.3-1.4 at 25oC
Method of application	Brush/Roller
Application temperature	Room temperature
Application Viscosity	20”
Coverage Area	110-140sqft/liter/1 coat
Drying Time Surface Dry	4 hrs
Minimum recoat time	4 hrs
Brushability	Ok
Flow Leveling	Ok
Opacity	Ok
UV Stability	300 hrs+
Gloss	Smooth Matt
Alkali Resistance a)NH4OH vapour b)10% NaOH solution	Passed IS+ Passed IS+

CALL US NOW

Office Telephone: 0484 2539439
Mobile: +91 8606511141

COME VISIT US

Octagreen Nano Products India Pvt.Ltd 48/2138,A,A1,A2,Shakthi Enclave, Perandoor Road,Elamakkara P.O, Kochi 682026.

SEND US A MESSAGE

General: prathish@octagreennano.com
Sales: mail@octagreennano.com